Fall protection that combines workplace safety and efficiency

Fall protection that combines safety and efficiency when working at heights

How do you keep your employees safe when working at heights – without making everyday work more complicated?
It’s a question many companies ask themselves. And while choosing the right equipment is important, it’s rarely the whole solution. Often, a broader perspective is required.

Efficiency and safety don’t have to be opposites – not even when the work takes place at height.

The challenge is well known: How do you protect employees optimally without unnecessarily complicating daily work? The answer lies not only in the equipment itself but in understanding the specific conditions under which the job must be performed. Only when you have the full picture can you find a solution that is both safe and practical in everyday use.

At ccbsafety, we believe that fall protection should be tailored to each individual task and work environment. Every solution begins with a thorough understanding of the workplace, movement patterns, and specific risks. We believe that efficient workflows require safety solutions that fit the job and are used correctly – voluntarily and naturally.

Too often we see standard equipment that doesn’t suit the work situation or restricts freedom of movement. Fall arrest blocks that are too heavy. Harnesses that don’t fit properly. Anchor points that are placed incorrectly. The result is lower productivity – and higher risk.

That’s why we recommend that the selection and use of fall protection equipment be carefully thought through, so the work can be carried out safely without the equipment feeling intrusive. It’s crucial that fall protection gear is used from the very start of the job and applied correctly throughout the entire process. The right equipment, used properly, significantly increases safety and ensures you are best prepared should an accident occur.

That’s why our collaboration always begins with dialogue and guidance – long before the equipment is chosen.

• What is the actual work environment?
• What movements does the task require?
• How do we ensure that personal protective equipment is used – and used correctly?

What you should know about fall protection

Workplace accidents caused by falls are among the most dangerous and most fatal in the Danish labour market. According to the Danish Working Environment Authority, 6,880 cases of injury involving vertical movement – including falls – were reported in Denmark in 2024. This underlines the importance of making fall protection a natural and planned part of working at heights.

When working at height, it is crucial to have the right safety measures in place to prevent fall accidents. These may include the use of scaffolding, guardrails, lifts – or personal fall protection equipment when other solutions are not possible or practical.

Personal protective equipment should only be used for short-term tasks where the work cannot be carried out safely in any other way. Broadly speaking, there are three main types of fall protection:

• To prevent people from falling
• To secure the working position so that a fall is limited
• To arrest people who have fallen

At ccbsafety, we recommend that fall protection equipment is selected and used with care – and preferably with guidance from experts. This is how we can best create safe and efficient working conditions at height.

Select the right equipment for the task

When working at height, it is crucial to choose the fall protection equipment that fits the specific task and the environment in which the work is carried out.
Incorrect or improperly used equipment increases the risk of accidents – and can also make the working day more difficult.

That is why the choice of fall protection should always be based on a concrete assessment of the work situation.
Here are the key components and how to use them correctly:

• Harness
  A properly fitted harness is the foundation of safety at height. It must fit snugly to the body and distribute the load evenly in the event of a fall. Attachment points are clearly marked and must be used correctly.
• Shock-absorbing lanyards
  Shock absorbers reduce the force generated during a fall. They can be built into a lanyard or a self-retracting lifeline. It is important to remember that two shock-absorbing devices must never be combined.
• Self-retracting lifeline (SRL)
  An SRL keeps the line taut during work and limits the length of a fall. It is most effective when positioned above the user, and it must always be checked whether it is approved for vertical and/or horizontal use.
• Anchor point
  Always use CE-marked and approved anchor points that have been tested to withstand high loads. To avoid a pendulum effect, the anchor point should be placed above head height and no more than 15 degrees from the work area.
• Connectors / carabiners
  Carabiners must be self-closing and lockable to ensure a stable and secure connection between equipment components.
• Work positioning belt
  Typically used when working in a lift or stationary positions where there is no risk of free fall. Work positioning belts must not be used together with shock-absorbing equipment.
• Work positioning lanyard / pole strap / positioning line
  This lanyard connects the harness or work belt to the rest of the fall protection system. It is primarily used for positioning at height or as a safeguard against approaching hazardous edges. The lanyard must always be kept taut during work and must not come into contact with sharp edges. Often referred to as “the third hand.” Note that positioning lanyards generally do not have shock-absorbing properties.
• Helmets
  Helmets protect the head from impacts and falling objects and are an important supplement to fall protection equipment. A helmet with a chin strap should always be chosen to prevent it from falling off, losing its protective effect, or becoming a hazard to colleagues if it drops.
• Ropes and lines
  Approved ropes and lines connect the equipment and must be of high quality to ensure maximum durability and safety.
• Power ascenders
  Motorised devices assist with rope climbing and positioning by providing mechanical assistance, making work at difficult heights more efficient and less physically demanding.
• Descent equipment
  Used for controlled descent and evacuation from height. It ensures a safe, stable, and controlled lowering of people or loads, typically during rescue, evacuation, or height work.
• Rescue equipment
  Ensures quick and safe evacuation of people, both upwards and downwards, in emergency situations.
• Permanent wire systems
  Permanently installed wires that provide continuous anchorage when working at height.
• Confined spaces
  Confined spaces are enclosed, restricted areas with limited access, where specialised safety equipment is often required – such as Skylotec’s fall protection and rescue systems – to ensure safe and efficient work in challenging conditions.

By selecting the right equipment for the specific task, you not only increase safety and efficiency – you also create better working conditions for employees working at height.

Navigate the equipment jungle – choose the right products and brands

The market for fall protection equipment is large and overwhelming – there are countless suppliers and products with varying quality, functionality, and price. So, who should you choose?

At ccbsafety, we help you find the right solution. We carefully select our suppliers based on several key criteria:

• Proven quality and certifications

• A broad and flexible range of products

• Competitive prices

• A focus on sustainability and responsible production

We emphasize more than just products – we want to share values with our suppliers. This means we prioritize partners who – like us – work towards high safety standards, transparency, and respect for both people and the environment.

With our experience and strong partnerships – including with reputable manufacturers such as Skylotec and Otto Schachner Nordic – we at ccbsafety ensure you have access to the market’s most reliable and thoroughly tested equipment, tailored specifically to your needs and working conditions.

Values that create lasting value – an example of collaboration with Skylotec

At ccbsafety, we work closely with leading manufacturers such as Skylotec and Otto Schachner Nordic because we share important core values that go far beyond the products themselves. Our partnership is built on service, responsibility, quality, innovation, and sustainability – values we believe are essential to delivering the best and safest fall protection solutions to our customers.

Skylotec is known for German precision and groundbreaking technologies in fall protection. Together, we ensure that the equipment not only meets legal requirements but also fits the real conditions employees face at the workplace. We focus on creating solutions that combine maximum safety with practical usability – because we know safety only works if it is used correctly and without hassle.

The shared principles we have with Skylotec include:

Together with Skylotec, Otto Schachner Nordic, and other carefully selected suppliers, we offer thoroughly tested and safe fall protection equipment.

Our partnership with Skylotec – quality and safety as top priorities

At ccbsafety, we offer a wide range of Skylotec fall protection equipment, carefully selected to provide safe and user-friendly solutions for our customers. Our range from Skylotec includes, among other things:

• Harness
  Available in various designs that ensure both comfort and freedom of movement – so employees can work efficiently without compromising safety.
• Self-Retracting Lifelines (Fall Blocks)
  Equipped with advanced mechanisms that guarantee reliable fall arrest and easy handling on construction sites, civil engineering projects, and industrial environments.
• Anchor Points and Anchorage Systems
  These systems can be adapted to different workplaces, structures, and building constructions to ensure optimal safety, flexibility, and efficiency. They provide secure anchoring solutions suitable for both temporary and permanent installations, depending on the task and work environment requirements.
• Rescue Equipment
  Designed for quick and safe evacuation in emergencies where time and reliability are critical.
• High-Quality Ropes and Lanyards
  Used for positioning, lowering, and rescue. Skylotec’s ropes are durable, certified, and developed to perform safely and effectively in demanding work environments.

We work closely with Skylotec to ensure that we can always offer equipment that meets the latest standards and requirements, while also being easy to use in practice. This close dialogue and partnership allow us to tailor our solutions precisely to each customer’s needs and work environment – whether it’s for construction sites, industry, or specialized installations.

Our shared focus on quality, innovation, and sustainability also means we can offer products that not only protect employees today but are also durable and responsibly produced – benefiting both businesses and the environment.

With Skylotec as a partner, we ensure you have access to the market’s most reliable fall protection equipment, supported by professional advice and service from ccbsafety. Together, we create safe workplaces where security and efficiency go hand in hand.

Safety at height – made simple

Safety at height – made simple
At ccbsafety, we help you create safe and efficient working conditions without it becoming heavy, expensive, or complicated. We offer expert advice, sales of the market’s most reliable equipment, as well as service and maintenance, so you’re always covered.

Don’t want to handle equipment and maintenance yourself?
We also offer fall protection equipment rental – not only for temporary tasks but also as a permanent solution for those who want to avoid the hassle. You get access to professional equipment, ready to use, and we take care of the rest – including inspection, documentation, and replacement when needed.
Learn more about our rental and logistics concept for fall protection equipment here.

We also train you in correct usage
No matter the solution, one important rule applies: never choose fall protection equipment without professional advice. Incorrect equipment, installation, or use can have serious consequences – both for safety and efficiency.
That’s why we also offer specialized courses in the correct use of fall protection equipment, so you and your employees are well prepared – both in theory and practice. Learn more about fall protection courses here.

Contact us today for a non-binding conversation.
We advise, deliver, service, rent – and train – with safety and user-friendliness as our focus.